FREE STUDY · 5 MIN LESSON
Draft Systems & Balanced Pours
Read this lesson without an account. To use narrated cards and save your progress in the app, create a free account or sign in. No payment is required for the free modules. Knowledge practice does not replace approved training or any skills evaluation your certifying body requires.
From Keg to Glass: Draft Systems
Check this point against current official guidance before relying on it.
- Every draft pour depends on a balanced system
- Gas, lines, temperature, and cleanliness all interact
- Imbalance shows up immediately in the glass
- This module covers the practical pass core
System Components & Gas Types
Check this point against current official guidance before relying on it.
- D-system Sankey coupler is the US standard
- Regulator sets applied pressure from the cylinder
- CO2 for most beers; 75/25 nitrogen blend for nitro stouts
- Nitrogen's low solubility creates the creamy cascade
Balancing Pressure, Lines & Temperature
Check this point against current official guidance before relying on it.
- Applied pressure must equal total system resistance
- 3/16" line: ~3 psi/ft; 1/4": ~0.85 psi/ft
- Every foot of rise adds ~0.5 psi resistance
- Warm beer, dirty lines, or low pressure break balance
Clean Lines & the Perfect Pour
Check this point against current official guidance before relying on it.
- Clean lines every 2 weeks minimum — caustic solution
- Quarterly acid rinse removes beerstone deposits
- Dirty lines = diacetyl (butter) and foam
- Rest a jostled keg before tapping
Quick Self-Check
Check this point against current official guidance before relying on it.
- Before the cards — picture your answer:
- In a balanced draft system, applied gas pressure should approximately equal:
- Then study to confirm it.
- Answer choices:
- Line resistance plus vertical rise pressure plus roughly 1 psi
- The carbonation volume of the beer multiplied by line length
- Only the carbonation pressure of the beer at serving temperature
- The sum of the keg pressure rating and the faucet back-pressure
- Answer: Line resistance plus vertical rise pressure plus roughly 1 psi
- Explanation: Balance means applied pressure equals total system resistance: line friction + rise + a small buffer (~1 psi). Carbonation volume alone ignores all physical resistance; keg pressure rating and faucet back-pressure are not legitimate balance components.